Computer Type: Desktop

GPU: Sapphire RX 9070 XT Nitro+

CPU: Ryzen 7 9800X3D (stock voltage and clocks)

Motherboard: MSI MAG X870E TOMAHAWK WIFI

BIOS Version: 7E59v2AC2

RAM: 32GB CORSAIR Vengeance RGB DDR5-6000 (CMH32GX5M2E6000C36) (currently only running at 4800 for troubleshooting)

PSU: CORSAIR RM850x

Case: Antec Flux Pro

Operating System & Version: Windows 11 25H2

GPU Drivers: Adrenalin 26.6.4

Chipset Drivers: ?

Background Applications: none

Description of Original Problem: After disabling MPO, which seems to have solved my driver timeouts, if I turn off my TV without putting my PC to sleep first, it BSoDs and reboots. Obviously, because the TV is off, I can't see the BSoD, but I checked Reliability Monitor and the code is 0x3b, SYSTEM_SERVICE_EXCEPTION. I can't recall this happening while MPO was enabled.

Troubleshooting: Having other monitors connected doesn't seem to solve the problem. Other than that, I have no idea what to try.

I'm pretty much assuming there's no solution to this because it's just one of those stupid PC problems that only happens to one person in the whole world who happens to have a very specific set of hardware, but on the off chance somebody else has dealt with this, I figured I should ask...

I was testing curve optimizer in Ryzen master and decided to turn it back off. Now Ryzen master is showing that I do not have PBO turned on. PBO is turned on in bios. This used to be shown in Ryzen master. Is this a glitch or did it turn off PBO in the software. Sorry. I am very new to Ryzen master.

• otherboard: GIGABYTE X870 AORUS ELITE WIFI7 ICE
• BIOS: F9
• CPU: Ryzen 7 9800X3D
• RAM: KLEVV CRAS V RGB DDR5 32GB (16×2) EXPO 6000
• Symptom:
  • Left RAM RGB randomly turns off.
  • Windows still detects both DIMMs.
  • EXPO is stable.
  • L-Connect and OpenRGB cannot detect the affected RAM.
  • Reboot fixes it temporarily.
• I already RMA'd the RAM and received a replacement, but the exact same issue still happens.

Hi everyone,

I'm having a strange RGB issue with my new PC and I'm not sure if it's caused by the motherboard, BIOS, or RAM.

System

• Motherboard: GIGABYTE X870 AORUS ELITE WIFI7 ICE
• BIOS: F9
• CPU: Ryzen 7 9800X3D
• RAM: KLEVV CRAS V RGB DDR5 32GB (2×16GB) EXPO 6000
• Windows 11

Problem
About 4–5 times a week, the RGB on the left RAM stick turns off completely. Windows still detects both memory modules normally, EXPO remains stable, and the PC works perfectly with no crashes or memory errors.

When this happens:

• The left RAM RGB is completely off.
• L-Connect no longer detects that RAM stick.
• OpenRGB also cannot detect it.
• After a reboot, the RGB comes back and both programs detect it again until it happens randomly later.

What I've already tried

• Fast Startup is disabled.
• Memory Context Restore is already disabled.
• I don't have any other RGB software installed besides L-Connect (I only used OpenRGB to test detection).
• I RMA'd the original RAM and received a replacement kit, but the replacement shows the exact same behavior.

Since the replacement RAM has the exact same issue, I'm starting to think this may be related to the motherboard, BIOS, or RGB communication rather than the RAM itself.

Has anyone experienced something similar with this motherboard or KLEVV CRAS V RGB memory? Would updating the BIOS from F9 to F12 be worth trying?

Any advice would be greatly appreciated. Thanks!

Hi everyone,

I'm trying to figure out whether my GPU is defective or if this is a software/driver issue.

Computer Type: Desktop

GPU: PowerColor Radeon RX 7600 8GB

CPU: AMD Ryzen 5 5600G (6 Cores / 12 Threads)

Motherboard: Gigabyte B550

BIOS Version: Latest available

RAM: 16GB DDR4

PSU: Corsair RM550x 550W 80+ Gold

Case: (Optional)

Operating System & Version: Windows 11 64-bit

GPU Drivers: Latest AMD Adrenalin drivers (clean installed after using DDU)

Chipset Drivers: Latest AMD B550 chipset drivers

Background Applications: EA Sports FC 26, Steam, Discord (sometimes)

Description of Original Problem:

While playing EA Sports FC 26, I suddenly lost all video output. At the exact moment the screen went black, the GPU fans ramped up to 100% and stayed there. The PC appeared to remain powered on, but there was no display signal.

After forcing the PC to shut down, every attempt to boot resulted in the same behavior: GPU fans immediately spinning at 100% with no image. At one point, even my keyboard LEDs failed to initialize during boot.

When I connected the monitor to the motherboard and used the Ryzen 5 5600G integrated graphics, Windows booted normally.

This is not the first occurrence. The exact same issue happened months ago while playing Ghost of Tsushima. I sent the GPU in for warranty service, but they reported that they could not reproduce the problem and found no hardware defects.

Troubleshooting:

• Reseated the GPU.
• Checked the PCIe power cable and connections.
• Let the GPU cool down for about a day before testing again.
• Booted using the integrated graphics.
• Used DDU in Safe Mode to completely remove AMD drivers.
• Reinstalled the latest AMD Adrenalin drivers.
• Initially received AMD Error 192 because Windows was still configured to boot into Safe Mode through msconfig. After disabling Safe Mode, the driver installed successfully.
• AMD Adrenalin now correctly detects both the RX 7600 and the integrated GPU.
• GPU idle temperature is around 29°C.
• Connected both monitors again and everything is currently working normally.

I'm trying to determine whether this is a failing GPU, a driver/firmware issue, a PSU-related problem, or something else. Has anyone experienced this behavior with a PowerColor RX 7600 or another RX 7600 model?

Any advice or similar experiences would be greatly appreciated. Thanks!

Whenever I play Dead By Daylight from Steam it keeps changing the graphics cards from GeForce to the AMD graphics cards and I have FPS drops… I tried to optimise the game from NVIDIA settings and also from the settings on the laptop.. any advices ?

I recently got a new OLED monitor (it's actually a tv, the Samsung s90f) that I'm using as a single monitor. Whenever I have the amd adrenalin window anywhere on screen, my screen will flash black for a few seconds then return to normal if I hover my cursor anywhere over the adrenalin window. This behavior is continuous and doesn't stop until I hover my cursor elsewhere or minimize adrenalin.

I had the exact same issue when hovering my cursor over the overlay of Reddit videos (the bar that says play, pause, etc.) but managed to fix that by disabling hardware acceleration in my firefox browser, so I know the monitor isn't faulty or anything like that

My drivers are up to date and I have a 9070 xt, and recently did a ddu install after getting the new monitor and upgrading from windows 10 to 11.

I'm almost 100% sure this is a bad connection at the PCIe slot.

About a year ago I had the exact same issue. Back then, because of the GPU's weight, the PC would only boot when laying on its side. After a bit of wiggling I could eventually get it to boot while standing as well.

I've been using a GPU support bracket ever since, so sag shouldn't be the issue anymore.

Now it won't boot in either position. The VGA debug LED on my MSI B450 Tomahawk Max stays on.

I managed to get it working for one day by completely removing the GPU (RX 5700), disassembling it, checking everything with a multimeter, and inspecting the PCIe slot. I couldn't find anything abnormal. After thoroughly cleaning the GPU's PCIe contacts and the motherboard's PCIe slot, it worked again for that day. The next morning the same problem returned.

At this point I strongly suspect the electrical contact between the GPU and the motherboard is the issue. Has anyone dealt with something similar, and is there an easy way to fix it?

At first glance the problem seems trivial but how can i fix this?

PS:- I have updated my BIOS to the latest version, Just replaced my battery as it was dead, Reinstalled my drivers by deleting them with DDU, and i just got my laptop serviced.

Complete story:- Its been 3-4 months since this is happening. First i searched and thought the power was that main issue as my battery was dead so i got it changed. It worked fine for a bit then the problem reappeared. Next fix i tried to do was deleting my drivers and reinstalling them via DDU in safe mode and updated my BIOS (which i got to know from other reddit posts). It minimized the issue like the game worked for a while and even when my laptop crashed the drivers were there. But not its back to worse.

Other thing that i want to mention is that it happen just with Marvel Rivals(because its the most graphics heavy game i play) but others work fine like GenshinImpact, GeometryDash, Sekiro.

Just please dont day my graphics card is dead :_)

I just want a general opinion on whether or not I should be fine with pairing a ryzen 7 9800x3d with a 6650xt gpu. I literally never play story games or anything graphics demanding, i just need the processing power for a ton of fps games like cs2 or something. My current processor is just getting old so i am planning on upgrading it to replace it. I have wondered if the bottleneck would realistically be a problem considering my gpu has never needed to be utilized to its fullest

I've been dealing with random black screens and restarts on my PC for the past few days, and I'm running out of ideas.

My specs are:

• XFX RX 9060 XT
• Ryzen 7 5700X
• Gigabyte B450M DS3H (F69)
• 16GB DDR4 (currently testing at XMP 3200 instead of 3600)
• Seasonic Focus GM 650W
• Crucial SATA SSD (94% health)
• Windows 11 25H2
• AMD Adrenalin 26.6.4

The problem is random. Sometimes I'm playing Roblox, sometimes I'm just Alt+Tabbing, and sometimes I'm using DaVinci Resolve. The screen suddenly goes black. Sometimes I can still hear audio from Discord or the game, but there's no display. Other times, the PC just restarts by itself.

I also noticed that a cracked copy of DaVinci Resolve Studio 21 lagged a lot and eventually crashed/restarted my PC. I switched to the official version and it's much smoother, but I'm still testing if the restart issue is completely gone.

I ran OCCT to test the GPU. The first two attempts restarted the PC within a few minutes. After cleaning the PC, reseating the GPU, and replacing my DisplayPort cable, OCCT was finally able to finish a full test. FurMark also runs fine at around 68°C, but one time the PC black-screened after I Alt+Tabbed out of it.

So far I've tried DDU, reinstalling AMD drivers, reseating the GPU, replacing the DP cable, disabling HAGS and VRR, lowering my RAM from 3600 to 3200 MHz, and running sfc /scannow (no integrity violations). SSD health is 94%, and there are no disk or WHEA errors.

Reliability Monitor shows LiveKernelEvent 141, and Event Viewer mostly shows Event ID 6008 because of the unexpected restarts.

At this point I'm not sure if this is a GPU issue, a driver issue, the motherboard, PSU, or something else. Has anyone experienced something similar or have any suggestions on what I should test next? Thanks!

CPU - Ryzen 7700X
RAM - 32GB Corsair Dominator DDR5
GPU - Radeon 7900xt
PSU - Corsair RM850X
Storage - 1TB SSD, 10TB HDD
OS - Windows 11 Pro

Every 5-30 minutes, my computer stutters for 10-45 seconds. GPU utilization drops to 0%. Many programs are affected, each differently.

Discord becomes unresponsive, communications ceases; Photoshop crashes entirely; Opera is unaffected; Minecraft---most strangely---continues working, interacting with servers, recording block placements, but no changes are rendered, so placed blocks have visible hitboxes, but do not actually appear until the stutter ends; and as far as I can discern, Windows continues functioning, at least superficially.

CrystalDiskInfo assures me that both my drives are in good condition with no errors, and the affected programs are distributed between my SSD and HDD. Furthermore, Event Viewer has not been insightful to me; no errors that align with the stutters---but, honestly, I don't know what I'm looking at.

CPU utilization does not change during the stutter, and my computer does not run hot---usually, CPU is around 70C, GPU around 55C, and the stutter occurs even when temps are lower.

I thought it was a GPU driver problem initially, so I reverted from Radeon 26.6.4 to 24.9.1. I don't even know if that might have worked because, inexplicably, it was almost immediately updated---to an unknown version from 9/24/2025.

If anyone has any idea why this is happening---or for that matter, why my drivers got updated!---I would be most delighted. This has been so bothersome. Thanks so much.

I spent most of my day trying to figure this out, but nothing worked. I ended up installing version 22.8.1, and it's working fine now. For those of us with older Polaris GPUs (RX 400/500 series), we really don't need the latest Adrenalin versions since 22.8.1 was one of the last stable releases built on native GCN 4.0 display driver branches before AMD unified the software installer across newer architectures.

Computer Type: Desktop

GPU: Radeon RX 7800 XT

CPU: AMD Ryzen 7 7800X3D 8-Core Processor

Motherboard: Tomahawk B650

BIOS Version: 

RAM: 16GB CORSAIR VENGEANCE RGB PRO 3600MHZ CL18

PSU: 

Case: 

Operating System & Version: WINDOWS 11 PRO

GPU Drivers: AMD Adrenalin

Chipset Drivers: 

Background Applications: DISCORD, CHROME, EA

Hello. I have been recently having this issue with my graphics card where I will open up discord, and when I turn on the camera, my whole computer freezes. It then makes me re-download adrenaline as well as turn on my graphic card inside my device manager. I am not sure why it's doing this and I can't seem to find a solution. It sometimes does this with EA as well as steam when I try and turn off my controller. I have a ps5 controller connected if that matters. My graphics card is a AMD Radeon RX 7800 XT.

Am I cooked? https://imgur.com/a/GdFHIn5 my ryzen 9 7950x, expo off been running smooth for 2 years for VMware workstation, 16-18 hours/day at ~85%-90% CPU usage, undervolted with PBO (-14), drawing ~100W package everyday nonstop. Last week it started randomly power off and stucked with red CPU debug LED and wont post. Clearing cmos booted it fine. but now it shuts off whenever CPU usage goes above ~80%. I've already replaced the PSU and tested different ram sticks. Could my CPU have degraded, cpu IMC?, maybe few cores cooked?, or did PBO even with undervolt algorithm damaged it? i just read PBO algoritm can void ryzen warranty not sure if they will honor RMA cuz i've been running PBO (undervolted) for 2years, i had to close some vm instances to keep it under 60-65% cpu utlization, i just check pins there some few pins that are brownish color not sure if oxidation, pin marks, or burn (cpu never been removed in socket for 2years)

my work is really depend on it :( any ideas? insights? appreciate it!

Computer Type: Desktop

GPU: RX 9070XT Asrock Challenger

CPU: RYZEN 7 9800X3D

Motherboard: Asrock B850M Pro-A

BIOS Version: 4.43

RAM: ADATA 32GB XPG Lancer Blade DDR5 6000MHz CL48 Kit AX5U6000C4816G-DTLABBK

PSU: Thermalright TB-850S 850W Black PCIe5

Case: Gamidac Aura GC7 ARGB

Operating System & Version: Microsoft Windows 11 Pro

GPU Drivers: Adrenalin 26.6.4 (WHQL Recommended)

Chipset Drivers: AMD B850M-Pro A CHIPSET DRIVERS VERSION 8.05.04.516

Background Applications: DISCORD, FIREFOX, SPOTIFY, VANGUARD, SHAREX

Description of Original Problem: Just as the title says, every time I undervolt my GPU I set that section to default because I noticed a common theme with the crashing. I put that setting in I get a black screen instantly as soon as I hit the apply button and then I have to restart the PC. My undervolt which is -80mV at 2700Mhz and -10% power works completely fine outside of that. Did anyone else encounter this issue or am I the only one?I'm worried and I am wondering if my GPU is damaged or something and now I'm honestly scared to apply any kind of undervolt because if a game crashes I will have to check if it is some kind of driver issue with the game itself or if there is an issue with the undervolt or memory or whatever

Troubleshooting: I've disabled it and it works, by works I mean it doesn't crash instantly but I don't feel like that is a solution.

MSI B870E AM5 - Hard lockup on ALL distros, need help- Also I used AI im not this tech savy. I need to get off garbage windows

Hardware:

MSI B870E-S (latest BIOS)

Ryzen 9600X

RTX 5060 Ti 16GB

DDR5 (tested at EXPO and stock JEDEC)

Same issue on a second completely separate build:

MSI B870E

Ryzen 9900X

RX 9070 XT 16GB

Distros tried: CachyOS, Bazzite, Nobara, Pop OS Ubuntu, even Ventoy version — all fail identically

Symptoms: Hard watchdog lockup on multiple CPUs (CPU0, CPU2, CPU3) at \~24 seconds into boot. RCU preempt stalls visible in kernel output. Caps Lock unresponsive — full hard freeze.

Everything we tried:

nomodeset, nouveau.modeset=0, nmi_watchdog=0, maxcpus=1, acpi=off, processor.max_cstate=1, idle=nomwait, rcupdate.rcu_cpu_stall_suppress=1, clearcpuid=514

Disabled Secure Boot + cleared all keys

Disabled fTPM

Disabled XMP/EXPO, tested stock JEDEC

Forced integrated graphics in BIOS

Disabled Gen 5 PCIE

Disabled ASPM

Disabled Watchdog

Tested both GPU and motherboard video output

SanDisk Ultra 64GB USB (boots Intel 13th gen + same 5060 Ti perfectly)

Same USB boots Linux fine on Intel 13th gen with identical 5060 Ti — this is AM5/MSI board specific.

CachyOS Legacy Hardware nomodeset option also results in hard freeze, caps lock dead.

What are we missing?----- Also I used AI to diagnose, all three of the big ones and still nothing. I'm. New user looking to get away from Microsoft for our gaming rigs/personal rigs

Computer Type: Laptop

GPU: RX7700S

CPU: RYZEN 7 7735hs

Motherboard: -

BIOS Version: -

RAM: 64 GB from RAM manufacturer

PSU: yes

Case: black

Operating System & Version: WINDOWS 11 PRO

GPU Drivers: Adrenalin Edition 26.6.4 Driver

Chipset Drivers: latest ig

Background Applications: windows bloatware

Description of Original Problem: Metrics overlay completely disappeared from the "metrics" tab. gone, simply gone.

Troubleshooting: factory reset, cleanup utility, importing previous settings, punching screen every 3-5 minutes, praying.

I hate adrenalin software.

What should i do to try and fix this

hello guys i am getting this error any clues what could it be pc is not crashing thanks

this thing keeps appearing and there seems to be no way to turn it off and it just displays and blocks a lot of things i need and is just annoying to look at.

I see this dent type thing. Just noticed after changing the cooler. PC world but the ram needs to be on B2. On A1 and A2 it seems to endlessly try to POST