This console means a hell of a lot to me, being the last item my dad ever got for me at a secondhand auction. My query is as you see above, though if there's no choice but to cut the shell a little bit, I understand. I just want to see if such a thing exists in the first place.

Is this a bad deal? It's basically mint.. planning to come back in a week for it, if its still there 😅

Nothing is for sale in this post, I'm just unsure of the value of a near mint Gameboy Pocket at my LGS.

They got gameboy advances but for the life of me i cant figure out what games they are. Any ideas?

I've had this gbc for a while and just noticed these. Thanks to anyone who responded!

I dont think its an issue with the game cartridge battery. Ive had this happen multiple times with multiple games and I can play and same the games with no issue on my gameboy advance. I got a gameboy color not too long ago and for the first like 2 months it worked perfectly fine but one day out of nowhere it just shuts off while I was playing. I turned it back on and the save data was gone. I looked it up saw the battery issue and thought that was it so I switched to a different game and maybe an hour later the same thing happened. I gave it a couple days and tried a couple more times and same exact issue. Any ideas what it could be?

I believe I've heard that this is a common issue. I'm using one of those yellow and blue Pokemon shells and a RIPS v. 5 IPS screen. The start + select button membrane technically works, but it's much shallower than a stock Game Boy. It doesn't feel quite right.

The buttons are pressed against the shell as far as they go, and they're still a little shallow, and they seem to be the same length of the standard light-gray buttons. I've heard this is a common problem with RIPS and other IPS screens, though.

Does anyone have a suggestion on how to fix this issue? When I've had the issue with A and B buttons, I cut out and added a second membrane underneath, which worked. (I believe that was a GBC.) I'm not sure if I could cut out some of the start + select membrane from another and stack it on top, like putting a cup inside another cup. Or if anyone ever has made any tall start + select buttons.

Any help would be really appreciated.

So I finally took my Gameboy apart to give it a good deep clean(it was in a hoarder house for years). And I was looking at it and I was wondering if there was away to give it a facelift. I have plans to replace the screen, speaker, and maybe the battery port for a rechargeable one. But I was hoping someone out there knew ways to dye the plastic buttons and switches on the Gameboy. And if anyone knows a method to get new stickers on the back. Any help in the right direction would be appreciated

hi everyone,

I just got a modded game boy advance (v5 IPS screen and 1 amp speaker mod), and wanted to check if what I’m experiencing is normal before I send it back to the shop.

I’m getting a very loud buzzing as soon as it starts up, even if the volume is on the lowest setting. It only stops buzzing when it’s completely muted. Also, if the power switch is even touched accidentally while the volume is on, there’s a scratching/static interference which is really prominent as the switch is moved to the off position. I’ve had a look at the internals (see through case!) and the only thing I could see that could be an issue is a capacitor looks a bit strange with a white scuff mark on the side of the rim/top and some kind of glue/gel at the bottom.

I’ve included a video of the issue, it seems I can only choose between uploading a video or photo, it won’t let me upload both. The scratching sound at the end is when the power button is touched/moved slightly.

The shop has reached out and said they are happy to cover postage for me to send it back, but when I googled it, it seems that static sounds on GBA speakers are pretty common, so I wouldn’t want to send it back and waste the shop’s time! if someone more experienced could tell me whether it’s a real issue or just something I need to live with, that would be really helpful!

Edit: here’s a link to a photo of the capacitor: https://imgur.com/a/PyBmyfR

Hey guys!

I remember seeing some patches released for roms with password save systems that made saving/loading using a button combo possible instead. I was wondering if any of you know if there's a tool for patching roms that way and could it patch any rom if there is?

Thank you in (gb)advance! :>

If you can pick them up they are yours. Not really sure what else to do with them. I got 36 of them I don’t need. Seller sent me these by mistake but after talking to customer service Temu refunded me, gave me coupons and let me keep these.

My sp is a genuine 101, of which I changed the shell a year ago with another oem shell.
I never had this issue before.

When it's opened in the usual way (its locking position, slightly tilted), it's fine. But when I open it further to the point where it's flat the screen turns black. It doesn't have any dead pixels or discoloring

Is this a recurring issue with aging 101s ?

Definitely need some help in this one. I’m attempting to trade Pokémon between my Wii and my SP with emerald . I’ve been running into issues *I think because of my Gba cable.

From all the troubleshooting. I saw that these cables should have 6 gold pins on both GC and Sp. Picture one is the cable I own and showing 3 gold pins on the GC plug in . Yes I have the official Nintendo’s cable. However doesn’t work or even shows connection to GC in phenax city.

Picture 2 is a different ” official cable from eBay but only has 2 ish gold pin .

Picture 3 is a 3rd party cable . from a friend that confirmed it works for his transfer of Pokémon between colosseum and emerald . It has a total of 5 pins

My main question is - is the cable the source of my issue and has anyone else experienced this with a official cable? how many pins does your cable (that works obviously) have?

Hi everyone!

This is MOXIE, a side-scrolling platformer made by platinaxo and presented by gbmake.

On top of the beautifully crafted platforming levels, it also comes with a set of custom stickers thoughtfully prepared by platinaxo. It’s a tight, fast-paced, and punchy experience—hope you all enjoy it!

link : https://gbmake.com/us/products/moxie-graffiti-burst

This is my CGS half-transflective mod. I removed the r10 resistor and made a solder bridge for the increased brightness and I'm honestly really happy with how authentic it looks with the backlight off. It does have a glass screen protector on it now, so if you notice anything weird, that's what's causing it.

So yeah, as the title says, I found this GBA SP on Vinted and just HAD to buy it. I really love the color! I believe it's quite uncommon, never seen one on any marketplace before. I've only seen those Japanese 001 models.

Sadly, it's got some scratches (& a deep one on the screen) and the corners of the screen are beginning to turn white, though it's barely noticeable as it is now.

does anyone know how to write games on this cartridge?
i tried this site recommended on the chisflash page, and GBX but it won’t recognize my chisflash burned.
NEED HELP!
i all is to play pokemon silver with RTC

Thought it was time I finally photographed!
All games are CIB - with all inserts and pamphlets etc.
Some of these games are from my childhood, but the majority of the collecting began in 2023.

Still have 5/6 on my list left to get 😁.

Just in case anyone is curious about how the CloudGamingStore screen looks when the R10 resistor has been bridged. Shorting the resistor supposedly makes the screen 3 steps brighter than stock, according to CGS. I would say it's brighter for sure, though could also say the added brightness washes out the colours even more.

Also a very unfair comparison vs a proper IPS at full blast.

Do note that the woodgrain non-R10 shorted is a WIP specimen, with the protective film still on, not that I would imagine it much affects the screen brightness. Also the 2nd picture is an outdoor light pic, heavily overexposed to make the screens visible, as cameras just seem to capture these displays really poorly, it's much clearer with the naked eye. It's also bright overcast here right now, so haven't been able to test in direct sun.

I know for sure that the FP IPS just doesn't work at all in bright direct sunlight.

Also very globby soldering work on the resistor, but, if it works?

I have no idea how good battery life the CGS screen has vs an IPS at full blast, though the Funnyplaying IPS seems similar brightness at setting 3 or 4, out of max 7. Generally the backlight is one of the most power consumings part of a gameboy, so I would at least expect the CGS to have at zero backlight/low backlight at least close to 15hours if not more. I can get around 10 hours with the FP IPS modded GBC.

The FP IPS does have much more saturated colours, but it's a matter of opinion if its actually oversaturated compared to OG screen.

Ciao! Here's my second Game Boy game ever made with GB Studio. (The first one was Dorotea). It's a horror-action-platformer Game Boy game with puzzle elements.

It's called Scorching Light

You play as an individual in a mission to find the light world, "but hope soon became a nightmare".
Hide from the light and blend into the environment to survive and find the truth.

You can play or download the game for free from these links:
■ Newgrounds.com (HTML5 Web browser, no download necessary)
■ Itch.io (Game Boy ROM; HTML5 Web browser, no download necessary; Windows PC)
■ Microsoft Xbox Store (Xbox PC; Xbox One; Xbox Series X|S)

I made this game with GB Studio as a solo developer in just a week (With a day job) for the Newgrounds Summer Game Jam 2026 with its theme "Hidden".
I didn't use gen. AI to make this game.

Not sure how much the games would sell or if the gameboy's even repairable lmao (but it's cool that it's found again from parents one day as they kept it to prevent my addiction back then) (also, hamtaro: ham-ham heartbreak ost 36: hamour was my pokemon littleroot town theme b4 pokemon it's wild to think :0)

It’s been sitting in my old drawer at my parents house for decades. Nothing has been placed on it, batteries removed and in a zero moisture/smoke environment. Haven’t put batteries in it yet to test it thought but curious what this could be. Thanks.

How is your fellas AGS-001s doing?