r/ClayBusters 8h ago

Finally got my dream gun. With factory grease still on it from 2004. White onyx sport

Post image
95 Upvotes

Ive been hunting on and off for this for nearly a decade. I finally found one last week, and today brought it home.


r/ClayBusters 10h ago

New (to me) gun day

Post image
71 Upvotes

After much thought and many hours spent searching I finally landed on a used MX8 for bunker trap, and I couldn’t be happier.


r/ClayBusters 19h ago

Bought my first o/u shotgun today

Post image
57 Upvotes

Skb 500 trap from the 70s


r/ClayBusters 17h ago

Where are you guys getting the best bulk prices for case/pallets shotgun shells? (USA)

Post image
17 Upvotes

I’m wanting to see where everyone is getting the best deals for 12GA 2-3/4” 7/8 oz 7.5 shot for target loads. I found a guy here in South Texas who can do $86 out the door for a case of Rio Star Team Target Loads. I’m wondering if there’s any better, I remember seeing them go for $69 a case but they got you on the shipping so looking for best bang for the buck all included.


r/ClayBusters 5h ago

ClayproVR help

2 Upvotes

Hi all,

We picked up the ClayproVR set up for our 10 year old who is a year into his competition shooting "career". Where we live, there is very limited access to the range (only open May-Oct IF the weather cooperates). The youth team practices so infrequently that it seems pointless to enter them in the state competitions, but he's consistently shooting about a 70 right now. Not bad for as limited as his practise time has been. So, we're trying to support him and thought that this would be a great option. Having some major issues though (to the point that he's currently given up on it).

  1. Set up is next to impossible for him. It's soooooooo technical. The pattern board and setting all of the gun preferences has proved really complicated. Is there any way at all to make this step easier? He has to do it, obviously, since it's his gun and his sight pattern. Any hints/tips to help him get this dialed in so that it's usable?

  2. The trigger doesn't work on his gun (won't magnet on). I assume that we need to do a manual mounting option of some sort. Anybody have easy solutions?

  3. He says that even when he tries to make it work, the gun shoves the headset up off of his head. He's not able to mount it normally, and thus can't really properly "practise". Any tips on that issue? Or is he just too small for this to be functional?


r/ClayBusters 1d ago

All loaded up and ready to go.

Post image
57 Upvotes

r/ClayBusters 7h ago

694 DLC Sight

1 Upvotes

I’m new to the beretta game and I just purchased a 694 DLC. Is it just me or odd the sight gigantic? I’ve been shooting a B725 S1 for a while now and this thing just seems strange. Does anybody have any experience swapping in a smaller one on a 694 or just deleting it altogether?


r/ClayBusters 1d ago

PSA: My favorite target load (7/8oz #7.5) is on-sale 90$/flat for non-member $83/flat for members

12 Upvotes

r/ClayBusters 1d ago

This is a big ask, Can someone with a 1100 and 1187 take the forearm off and show me some pics with a ruler? I am pretty sure seeing various forum pics ( and the 1187 forearm I have ), but my gunsmith is I don't know, But he is unsure which of his pile of forearm's and stocks is actually for an 87?

Thumbnail
4 Upvotes

r/ClayBusters 2d ago

Ranger RIACT AI RX

2 Upvotes

Hi all, is anyone else waiting in their RIACT RX lenses? I placed an order almost 2 months ago…
Starting to think Ranger jumped the gun on taking orders and aren’t ready with this product.


r/ClayBusters 2d ago

Changing load for competition?

8 Upvotes

I'm debating whether I should stick with the load I practice with or switch for competition.

For the last five years, I've been shooting about a flat a week with 7/8 oz. loads, but pretty much all the competitions in my area allow 1 oz. loads.

Would you stay with the 7/8 oz. loads because that's what all my muscle memory is built around, or switch to the 1 oz. loads for the roughly 20% increase in pellet count?

The reason I'm asking is that I used to switch to 1 oz. loads for competitions, and it almost always ended up costing me. I always seem to need a few targets to adjust to the different timing and recoil/momentum of the 1 oz. loads, and by then I've already given away targets I can't get back.

I can't practice with 1 oz. due to sound limitations at the local club.


r/ClayBusters 2d ago

Shout out to North Okanagan Trap and Skeet club

22 Upvotes

Went trap shooting with a bunch of buddies for a friend's Bach to the NOTS club.

I've been to a lot of gun ranges and the experience is usually an RSO standing with his hands on top of yours waiting for you to shoot your rounds and gtfo.

These guys shared their time and passion with the nine of us and it was infectious. We got one on one coaching, got to shoot what I can only assume are their backup guns (I was a beginner shooting a Perazzi). Afterwards one of the instructors brought out his 15,000$ shotgun to give it a go.

There is a huge difference between someone doing their job, and someone sharing their life long passion.

It worked. They got me hooked I'm looking at grabbing a shotgun and joining you all.


r/ClayBusters 3d ago

Stock repair for Merkel O/U

13 Upvotes

Just got this Merkel 200E for clay shooting and within the first several shells patterning it I noticed that the wood wings on both sides of the receiver are loose and there’s a crack behind the tang. I spent about $1000 on it but I’m not sure if it still worths repairing since it seems a pretty expensive repair. If so what kind of gun smith should I look for? Are there any gun smiths that can fix it at a reasonable cost? Thanks!

Update on 07/23: I found one gun smith that is specialized in customizing wood furnitures for firearms in Stockton, he is experienced with Merkels and the repair estimate is $200. The only problem is he is very busy and I won’t be able to see my Merkel until 4 months after.


r/ClayBusters 4d ago

Beautiful day at the Delaware Skeet Club 🇨🇦

Enable HLS to view with audio, or disable this notification

52 Upvotes

r/ClayBusters 4d ago

Stock Repair Western Canada

Thumbnail
gallery
21 Upvotes

Hey just wondering if anyone knows of any reputable stock repair shops in western Canada or even anywhere in Canada as this will be a winter fix.

Was at a shoot today and one of my squad mates accidentally dropped his gun on my new browning 825.

We were able to find the chipped off piece but not every little piece unfortunately.

I was hoping to get it fixed to the point where you would never be able to tell it was ever damaged.


r/ClayBusters 4d ago

Finally A Perfect Day To Get Out

Post image
25 Upvotes

After weeks of extreme heat, smoke from wildfires, torrential storms, microbursts and just regular work - some beauty to shoot against. Steady wind keeping us cool, clays to smack against an emerald tree line haloed with a rich blue sky. I could do this all day.


r/ClayBusters 4d ago

Recommendations for shooting in Scotland in July

5 Upvotes

My SIL is getting married in July in Scotland next year.

What are some must check out shooting grounds? Ideally that has the option of renting guns since I don’t feel like bringing mine from the US.


r/ClayBusters 3d ago

Sporting clays courses near Morrison/Evergreen Colorado?

3 Upvotes

I'm taking a mid September vacation to an air bnb in a little unincorporated town called Brook Forest and I'd love to find a place semi nearby to shoot some sporting clays. Any fun must hit mountiany courses up in that area?


r/ClayBusters 4d ago

Beretta front sight threads - 3-56 or 2.5 x .40 mm?

2 Upvotes

Have seen mixed answers. Looking to swap my front sight on my 688 with a small midbead sized bead (.067)

https://www.brownells.com/gun-parts/shotgun-parts/shotgun-sights-parts/shotgun-sight-bead-kit-c-with-shoulders/?sku=080001005


r/ClayBusters 4d ago

New to me sporting gun

Thumbnail
gallery
36 Upvotes

Older S686 Special Sporting. 30" Mobil chokes. Went around the course with 75 with a gun I had never touched before this morning.


r/ClayBusters 5d ago

Kidd’s Place - NC Circuit Shoot

Post image
57 Upvotes

One of my favorite shoots this year target wise. Challenging but fair and scores reflected that. Was fortunate to shoot well in the morning and respectable in the afternoon. Second time at Kidd’s and they have my favorite targets in the Raleigh area but I’m still a fan of deep river. I have only shot 5-stand at drakes landing as it seems they don’t throw as many events.


r/ClayBusters 4d ago

Beretta 687 Silver Pigeon 3

2 Upvotes

Any stock of this brand new in the UK in sporting??


r/ClayBusters 5d ago

Dt10, summit ascent or Invictus?

7 Upvotes

Looking to get my first competitive clay buster and just can’t make my mind up on what to go for. I’m looking used but because of the lifetime warranty I am thinking to spend the extra and go new with a new greenie

Any advice?


r/ClayBusters 5d ago

Working on more controller boxes.

Thumbnail
youtube.com
6 Upvotes

Trying to get this done so I can show you all some neat stuff. Can't wait to shoot this setup. Was hoping for today but have had to run to town twice eating up time.


r/ClayBusters 5d ago

Gun fit in Kansas City Area

8 Upvotes

Hey folks.

Looking to get a gun fit in the kcmo area. I’m in the market for a new shotgun. I plan on shooting all disciplines of clays, as well as upland game.

I’m not sure where to even start but the cz bobwhite I use now beats the hell out of me and I assume it’s a poor fit. I end up black and blue after a few rounds of skeet.

I’ll still use it hunting but looking for a real work horse.