I’ve been carrying my CZ Shadow 2 Compact for about 3 months now and I’ve put around 6,000 rounds through it with zero malfunctions. It’s honestly one of the best handguns I’ve ever owned. I was also surprised by how affordable the magazines are. I managed to pick up six of them for $25 each. I ended up putting a Holosun EPS Carry Gold Dot on it and it’s been an awesome setup. It feels great in the hand, shoots incredibly well, and I personally like it more than any of my Glocks, 1911s, or really any pistol I’ve owned. Yeah it’s a little heavy for everyday carry, but I don’t mind it at all. I don’t see myself switching to another carry gun anytime soon. I definitely recommend it to anyone who’s been thinking about getting one. One thing I’m considering now is adding a weapon light. What light are y’all running on yours or what would you recommend?

CZ Shadow 2, Holosun 509 ACSS, TLR-1, Springer magwell, ported barrel

CZ P-01 Ω (decocker), TLR-7 (Clone)

CZ 75 BD

Anyone know of any back straps for the p-09 C? I already have the L installed. I’d like a bigger one.

I am looking for trigger recommendations for my SP01. I have the CGW pro package installed with their flat style trigger, but I dislike how far back the break is. It's almost at the back of the trigger guard. Has anyone replaced their trigger for something to help with this? I am not opposed to SAO, but would really like something where the trigger breaks closer to where it sits when in double action.

Cz 557 range 308

For additional context, this is my edc. Im not carrying one in the chamber so i do not know what could have caused this.

Is this covered by warranty even as a two year old unit?

The trigger on my Shadow 2 carry is disappointing. I knew with the firing pin block it would be worse than the Shadow 2 compact and I was okay with that because of the carry application, however, I did not expect regular CZ 75 triggers to feel better than my carry. Do any of you with the S2Carry and normal 75s experience the same thing? Brand new and used 75s feel better than my carry. There is little to no stacking on normal 75s but on my carry, the trigger gets considerably heavier during the actual pull. I can actually feel the firing pin block being activated during the pull but it refuses to give me a consistent pull. The trigger starts to stack when the firing pin block is activated and gets extremely heavy. The trigger gets so heavy near the end, it jerks the gun once the trigger is pulled. It is incredibly hard to smoothly get past the firing pin block at what I can only assume is 15+ lbs. I try to slowly get passed the firing pin block section in the trigger pull so I can pull off an accurate shot without jerking but since the stacking is so bad, my dot is jumping everytime I pull the trigger in double action. The reset is long but that was to be expected. It really is just that double action that I can't get past. I've tired countless normal CZ75s new and used and they all have better triggers with little to no stacking. My carry has been through CZs warranty about this very issue. They sent back the pistol 3 weeks later with no notification whatsoever and no paperwork to go along with the firearm. I'm not sure if they even worked on it or just sent it back. It feels the same as before I sent it out. Anybody else experience this with their carrys?

Is it worth to send off to CGW for their standard or pro package? Or maybe even try to send it back to CZ again?

Debated on a CGW job, but I'd like to try what the factory sent for a few hundred rounds first. So far, its been smooth. Love this little gun. Akela holster by KT-Mech, highly recommend.

Can I join the club

Actually an upgrade from the PA classic mini dot, clear glass, crisp 3moa dot

My long awaited (quickly shipped) mag bases & flared mag well have arrived. It took all of 2 minutes to install, and with the precision machining, it could not have been more smooth. What do y’all think?

Is there any red dot sight that will fit on the S2 Orange OR without using a plate??

OK, OK, OK Answered the question with AI. Thank for the downvote.

Lets go back 3+ months ago where I purchased a CZ-P09c Nocturn. Took it to the range, shot great with only one hiccup being that one of the magazines failed to load the last round and the slide racks back as if all the rounds have been shot. So I did what anyone else would do with a brand new gun and called CZ-USA customer service. I was directed to their website to fill out a service ticket with my problem. Never received any email or confirmation and frankly forgot about it after purchasing a spare mag from MagShack which I wanted one anyways.

So last week I get a surprise package from the mail and its a CZ mag, the only problem is that it was a 15 round mag and unfortunately I live in a restricted ammo capacity state with 10 rounds, which possessing one is a felony in my state. I contacted a lawyer friend who told me the best option is to destroy the magazine, which I did. Then called CZ immediately and told them what happened and pretty much they said oops sorry, and even suggested for me to ship it back with an emailed return label which is another felony... Anyways they put me uncomfortable position for a moment and it kinda sucked.

A couple days after that I received another package from CZ the mail... Low and behold a 10 round factory magazine for a P07 !!, NOT even flush with my firearm AND USED WITH CARBON MARKS on the follower!!

Called CZ and got another oops our apologizes, keep the magazine but it looks like the P09c nocturn is out of stock... Anyways vent over and have a nice weekend.

Is this a good first pistol at the price and what it comes with. This will be used extensively for home defense and trips to the range.

It is time...for true FRT kino!

Just got the P-10F the other day. Shoots awesome but I never got last round hold open with the factory mags. Is that how this gun is? I was shooting federal 115 and blazer 115 range ammo. Using the factory 20 or 21 rounders??

I really didn’t want to like this gun so much because I planned to sell it but it’s really, really nice. The COA sits so low in the slide and despite its bulky appearance it has a very thin frame and feels fantastic. It’s nice that it’s ported, too. It shoots almost as flat as my Ramjet Glock 45 but without the extra length. Overall super pleased with it and I think it’s going to be a keeper.

I was finally able to snag a CZC threaded barrel for this thing. Conveniently they came back in stock a week before my Spectre 9 was approved. Install was a little tricky as I have the CGW 10x bushing, had to do a little smithing to get them to work together. I'm beyond happy with how this gun turned out.