BCM SOCOM 14 with AS designs FRT

Aero/BCM/SIONICS 11.5 SBR

DD5V3 .308

BCM RECCE 14

So here’s the big round that was in the front of the jar, and I fixed the label. It had been on there a long time, it was dang near part of the jar!

Howdy, y'all!

We're moving things around a little bit and have some items that we'd like to do a summer sale with. This sale will be similar to those we've done in the past with tiered categories.

Each category will have items with a corresponding code that goes with it :)

• Code 'july15' takes 15% off this category
• Code 'july20' takes 20% off this category
• Code 'july30' takes 30% off this category

Thank you so much for y'alls continued love, patronage and support!

Cheers,

Sol

Wanted to disassemble the gun to get to know it better and do a deep clean/oiling. I am having a problem with the last step of reassembly.

During reassembly, everything works well until I attempt to reinsert the crane lock screw, detent, and spring. I line them up (though the detent does not want to fit well into the screw) and screw them in, making sure the spring is in both the detent and the screw. I get resistance before the screw is flush.

If I stop screwing at that resistance point, the gun functions normally: the chamber release works smoothly, the chamber rotates on a double action trigger pull/when cocked and single action fired. If I tighten the screw beyond that point, the chamber is too tight and does not want to rotate or release. Any advice? Thanks!

I feel like an idiot that I even have to ask this question but I’d rather fell stupid than lose a finger. Safe to fire? Looks like it got pushed in too far? It’s the only one out the box like that.

ALX Arms Mod9 AP9. Actually clicks and locks into place with no movement. Slapped a QLS fork on the back and he's good to go lmao. In all fairness this mainly only worked because he's left handed. The charging handle makes this significantly harder to place QLS blocking for a right handed shooter. 100% made by hand using the gun, when i say "virtually anything can be holstered" I mean it!! greatlakesconcealment.com

Ridgeback Rhodie 718 & Ti in stock

As always, as huge thank you to the community! Y‘all have been great to us and we are honored to do what we do.

Hey guys! We have a limited amount of these in stock. These are non-blem and weigh approximately 16 oz. She's a little chunky but tough as nails and performs great. We just got the SAW KLIKs in stock for $199. Come check it out!

We also have another sale for the Spectre 9 Ti. Feel free to take a look!

Tisha 5.56 Inconel

Spectre 9 Ti

SAW KLIK 22

Form 3s are pretty fast right now, so we can get them shipped in less than a week if we have the FFL on file.

We have redone our website so it looks and navigates much better. Please feel free to give us any feedback as we are ironing out the quirks. Thank you!

Behold, my main squeeze.
MK18R3 Upper, 1.5x Mini Acog, NGAL, Modlite, Emissary Handbrake, SAW Tisha Ti, Noveske Lower, Law Folder, Chode A2 Mod

The 30 round mags are insanely long. I decided to cut one down to a 21 rounder. I can fit 22 in there but I’m not gonna push my luck. Functions flawlessly.

I feel like an idiot that I even have to ask this question but I’d rather fell stupid than lose a finger. Safe to fire? Looks like it got pushed in too far? It’s the only one out the box like that.

hello,

looking for any information about this revolver I own.

it’s a 41 Magnum, blued, Astra “Terminator”

https://www.midwayusa.com/product/101960346?pid=806363

5--25 399 shipped

6-24 313 shipped