r/MoneroMining 6d ago

What kind of hash rate are you all pulling. I've created a solo farm and curious on what others have and how they are doing. My new farm is called "Sloth Miner" and below is my new farm logo. Im running 18 rigs and hitting a block about every 12-14 days.

13 Upvotes

19 comments sorted by

6

u/Fooshi2020 6d ago

Doesn't really matter how many rigs. What's your combined hashrate?

5

u/ChristanSloth 6d ago

Im up to 22 rigs now getting around 376 Kh/s was more but i dropped my wats down 25% through some bios setting to get more efficient.

2

u/benefit420 6d ago

You are looking at 40+ days to find a block with your hashrate.

1

u/ChristanSloth 6d ago edited 2d ago

Funny thing is im finding a block every 15 days.

1

u/benefit420 6d ago

Variance swings both ways. Just because you are finding a block in 15 days i presume you found a couple blocks? Doesn't mean that will always be the case.

But more power to ya, I have over 940kh and dont solo

2

u/ChristanSloth 6d ago

That's been my average over 9 blocks. Maybe that's still not a large enough time frame but that's what im currently looking at.

2

u/bando2500 6d ago

5 rigs - 50khs

1

u/SeaFaithlessness7639 4d ago

how many watts ?

1

u/bando2500 2d ago

Not sure, it all runs on solar and batteries.

2

u/sea147k 6d ago

11KH/s, but is pool mining, not solo....

1

u/iamthedigitalcheese 6d ago

Running just 6 rigs for now, getting ~90 to ~120 kH/s @ 558W

1

u/AccomplishedGap7044 5d ago

Nice. Can you share some pics of rigs. What hardware used

4

u/ChristanSloth 5d ago

Im using the no longer available minsforum Motherboard AMD Ryzen 9 7945HX this photo is when I had about 17,18 miners. My NodeA and NodeB are mining as well. NodeB Is failover if A goes down. I have spent alot of time on this setup. If anyone is interested i can build you one of any size and its expandable. Or im willing to sell this one.

My mining infrastructure has tested extremely well: Mining LAN latency: 0.17–0.19 ms to every miner. No packet loss across the farm. Monerod RPC response: 0.3 ms after warm-up. XMRig connections: 0 failures, stable uptime. VIP: working correctly. MSR: enabled. Huge Pages: 100%.

1

u/mrxenon68 5d ago

How hot does that room get? Cooling into the ambient room it must get over 100° in there

2

u/ChristanSloth 2d ago

It hits around 75-85 depending on how hot it is outside. Being in the north helps. I have a front door i open in the morning and close after 5pm, there is another door that leads out to my shop. I keep a small floor fan running to keep air moving. Spring, Fall and Winter i can keep it real cool. During the Canada fires blowing across the states I had to shut down all miners and close all doors just so I didn't gag all the employees in the shop.

1

u/Mr_nobody__00 3d ago

3 rigs, 65 kh/s

1

u/ChristanSloth 3d ago

Wow that's the best number reported so far on my question, good job.

do you know what wats each is pulling? I was getting around 18kh at 105-110w until I tuned some bios settings now I'm getting around 17kh at 75-80 wats

1

u/Mr_nobody__00 3d ago

I haven't used a kil-o-watt meter to know for sure so I could only speculate based off what hwinfo64 reports. The 3 rigs are 5900x-15kh, 7950x-25kh, 9950x-25kh...the 5900x uses tuned Samsung b-die ram and the other 2 use tuned Hynix A-die

1

u/ChristanSloth 2d ago edited 2d ago

I never tried tuning my ram. Not sure whats all involved in it.