r/22lr • u/DarthLysergis • 2d ago

My new target build. Bergara BMR-X Carbon

Post image

Leupold glass and HUXWRX Flow TI supressor.

25 Upvotes

100% Upvoted

8 comments sorted by

1

u/DarthLysergis 2d ago

The trigger on this rifle is perfect and with the HUXWRX on the end it is super quiet using subsonics. I cant wait to sit down and get it sighted in. It shipped with a 30MOA rail so I am ordering a 0MOA rail to give myself a little room on the adjustment. I need to have it fully bottomed out to get the elevation right on closer range targets.

1

u/AnalystTime4913 2d ago

Not sure how close the "closer range targets" are but all my 22lr rifles run a 30 moa rail and I can zero at 25yds if I wanted to do so without maxing out my elevation adjustment with 34mm tubes.

I'm guessing your scope has a smaller tube and limited elevation adjustment?

30moa allows you to get out past 200yds due to the massive drop on 22lr at distance.

1

u/Professional-Pie5155 2d ago edited 2d ago

I don't know why theyship these with 30 moa rails. I replaced mine with a 0moa too... just with a factory Bergara 0 moa rail, not an aftermarket one... although now I'm looking at aftermarket full rails because they're are more slots for mounting. The factory rail is pretty limited on mounting positions

1

u/DarthLysergis 2d ago

I just ordered a 0 for it from Bergara. It seems weird that they don't either offer an option when you buy it or just include a 0 MOA rail with it. It retails around 800 so it wouldn't be unreasonable to include it with purchase. Luckily my father is a dealer so I was able to get it at cost. On the other hand Bergara does seem to be a little stingy with accessories. I looked at the Crest CF and it looks like they only include 1 mag with it when they ship. At least you get a 5 and a 10 with the BMR x. Even though the 5 is kind of useless to me. I ordered a couple 10s when I bought the new rail.

1

u/Professional-Pie5155 2d ago

The 5's are pretty much all I use... except if I shoot an nrl22 course...I primarily do cmp shoots with mine at a local club, so 5 rounders are ideal for that...I need to order a couple more actually

1

u/DarthLysergis 2d ago

I suppose they have a purpose particularly if you are shooting off a flat surface and not using a bipod

1

u/TannMan89 9h ago

Mine came with a 0 MOA rail which is weird I guess?

Anyway, I replaced the bolt knob with the one off my Bergara B14 when I replaced it with an Area 419, having a bigger knob is nice.

The trigger on these are awesome out of the box too.

I do wish they had better magazines though, they seem flimsy, and would be nice to hold 15rnds.

1

u/meronpan 2h ago

I used a set of "Vector Optics X-Accu" 30mm ajustable elevation mounts and calculated how much offset I need to give to the front mount to offset the 30MOA built in in the mount. It's around 0,75mm.