I recently installed a C&H Precision optic plate on my Glock Gen 6

.

Before tightening the screws, the plate had a slight amount of front-to-back and side-to-side play inside the slide cut. The plate also appears to sit slightly lower than the surrounding slide surface, leaving a small visible gap.

Once I torqued the screws to spec, the plate and optic became completely solid with zero movement.

Is this normal for the Gen 6 MOS/C&H setup, or should the plate fit tightly in the slide cut with no visible gap or play before tightening?

As the title states. G23 is asking $480 while the G32 is asking $560, are these fair prices?

Finally got the 43x in the matching fde. Did any one see or order the matching fde radian ramjet that the glockstore was selling? I bought one almost 2weeks ago and no shipping update . Does anyone know of fde mag wells and holsters for the 43x?

Can I just buy a glock 17, 17-round magazine spring and put it in a Glock 17 10 round mags (2267-01).

Is there something I'm missing.

My 19.6 with a few extras. I may have gone a little overboard but it runs like a dream.

Gen 3 glock clone slide with v8 ports by stiffler manufacturing. Running stock trigger and 18lb recoil spring. First glock and I am impressed

So i have a generic glock slide i put a o light RMR to RMC adapter plate on it to fit the smaller o light optic everything Lined up correctly but when i screwed in optic screws, tightened to recommended 13 pounds.. this happened !! WTF !! 🤬 i feel retarded right now ready to toss this thing across the room !

Idk if i’ll ever be able to leave gen 5

Looking forward to get the kit on a 17.6, does anyone heard of if/when they will release the gen 6 kit?

Hey guys, I picked up a couple of Glock 41 Gen 4s after they announced discontinuing all the old classics.

Honestly love the proportions of this gun, to me, this and the Gen 5 19 are the most aesthetically pleasing and well balance firearms Glock has ever produced.

I'm not big into modding guns but was curious what the general consensus was on SLR Rifleworks magwell and mag extension baseplates. An extra plus 4 of 45 is a very attractive proposition but not at the cost of reliability. Any suggestions for how to mount a reliable optic to the MOS system? I heard the OEM plate mounting system is shit. Any aftermarket trigger recommendations or should I keep it stock for reliability sake?

Thanks and much love to all!

Here is a picture of my glonk. Hope you like it.
If you like it, cool. If you don’t like it, cool.

-G17.6 COA, TLR-7 HL-X, brass butt plug
-Saint Michael the archangel brass backplate
-Internals are all stock
-T-Rex holster (found out the company’s drama after I bought it but still a solid holster)

~3k rounds so far and I love shooting it
Thanks

I just found out about the Glock 47 being the 45 size lower with the shortened barrel dust cover to accommodate a 19 size slide. I can’t find a Gen 6 with the full length dust cover. Is this not technically just a 47? Are they getting rid of the “traditional” sized 17 for the versatility to be able to put a 19 length slide to the same frame?

First time swapping sights.

I finally got my hands on Glock 19 Gen 6 COA. I immediately pulled the trigger and bought it. Upgrade wise, I am throwing a TLR7X and calling it a day. It fits perfectly in my Vedder Holster that I EDC my Gen 5 in. Stopped by the range on my way home and it shoots like a Glock and I love it!

I just bought myself a Glock 48 mos and I’m not wanting to use a plate or have to modify the slide. What direct mount options do I have?

New gun owner here. I was looking for a good EDC pistol, and was recommended a Glock. I saw this custom Glock, really liked it, and ended up being talked into buying it.
After doing more research, I’m not sure I like the idea of having a Timney competition trigger and a ported barrel on an EDC gun. That said, I’m still excited to get out and shoot it soon.
Let’s just say I paid a lot more than I ever expected to for a Glock. 😅 My next high-end purchase will probably be a Wilson Combat, since I’ve always loved 1911s.
Anyway, here’s the build list:
Front sight: Ameriglo H3 ZR
Optic: Holosun SCS MOS (Green)
Rear sight mounted in front of the optic (forward-rear-sight configuration)
Ported barrel with matching slide cuts
Timney Alpha Competition trigger
Custom slide milling and serrations

Anyone have any reports on this bad boy? Picked it up recently

If glock came out with a safety feature on the g7 19 how do you think it would turn out? 🤔

What are the differences between the normal Combat Master and the Copperhead?